Electric regulation of external rear-view mirrors
Both mirrors are regulated by the switch in an armrest of a driver's door. Besides, the surface of mirrors is warmed, if heating of back glass is included. More detailed information on mirrors (with mechanical regulation) you will find body Elements in the head.
If at inclusion of adjustment of mirrors they not движутся:
|
|
- At first it is necessary to check up a safety lock.
- Then to remove the switch (see above in this chapter) and to check up it under the scheme (also resulted in this chapter).
- If the switch is perfectly in order, it is necessary to remove a mirror that there were accessible connections of the regulating engine (the head body Elements).
- Whether pressure arrives at the included ignition and switch pressing to engine contacts, whether connection on "weight" is serviceable?
- If the answer is positive, malfunction is covered only in the engine. Unfortunately, it cannot be got separately, but only complete with a mirror.
- However it is temporarily possible to adjust a mirror a hand.
- At idle heating of a mirror it is necessary to check up under corresponding electroscheme a way of a current from the switch of heating of back glass.
|
|
|