Screen wiper of back glass
The screen wiper of back glass joins, if you wring out the lever switch of a screen wiper in a direction of the instrument panel. The pump ??????????????? simultaneously joins, and after certain time water pours out from an atomizer. By short pressing the switch the faltering operating mode joins. For its switching-off it is necessary to press the switch once again. The plug 53 запитывает the screen wiper engine, a plug current 53а returns brushes in a starting position.
Removal of the engine of a screen wiper of back glass
|
|
- To remove the screen wiper lever.
- To turn out a nut on an axis of a screen wiper and to remove it together with an insert and a sealing lining. To postpone details in sequence of removal.
- To remove a covering of a back door.
- To pull together a hose ??????????????? from the screen wiper engine.
- To turn off the holder of the engine of a screen wiper of back glass and to remove it together with the engine.
- To separate the multicontact tip.
- To remove the engine from the holder.
- At installation of the new engine to allow to it to occupy a starting position with the way described for the engine of a forward screen wiper.
- To fasten the screen wiper lever.
- The screen wiper brush should be at rest on distance of 40 mm from a bottom edge of back glass.
|
|
|