Audi 80/Avant (B4)



Audi 80/Avant
The description
Engines
System of release of the fulfilled gases
- Cooling system
   Check of level of a cooling liquid
   Frost resistance check
   Check of system of cooling on tightness
   Radiator
   Carving cover of a broad tank
   The thermostat
   The list of malfunctions
   The water pump
   Klinovoj belt of the water pump
   The fan of system of cooling
   Malfunctions of the fan of system of cooling
   The list of malfunctions
Fuel tank and the fuel pump
The air filter and intake channels
Injection system
Coupling
Transmission and transmission
Suspension bracket and steering
Brake system
Antiblocking system of brakes
Wheels and tyres
body electrosystem
Ignition system
Illumination
Signalling devices
Devices and auxiliary devices
Heating and ventilation
Body elements
Search of malfunctions
Specifications












Cooling system

The cooling system in Audi 80 carries out two functions: cools the engine and warms salon. Usually it is very reliable, but if all the same there were the malfunctions, the given chapter will help you to understand with these problems.

So there is a cooling

At the working engine the water pump constantly pumps over cooling liquid on numerous охладительным to channels of the engine and deletes heat arising in cylinders at combustion.

The drive of the water pump in the 4-cylinder engine is provided клиновым with a belt, in the 5-cylinder engine a gear belt, and in the 6-cylinder engine – поликлиновым a belt.

The way of passage of a cooling liquid depends on its temperature at present time:

  • If the engine yet has not reached working temperature the cooling liquid flows on the small contour passing through the engine and the heat exchanger. In addition the inlet collector is connected to a small contour of a cooling liquid.
  • On reaching temperature approximately 87С the thermostat opens the big contour which includes also a radiator. If the temperature of a cooling liquid rises further so even in a radiator the temperature makes from above 92С, business is entered by the radiator fan, helping at cooling.

The system of cooling calculated for work at superfluous pressure

In cooling system at working temperature the elevated pressure 1,2 – 1,5 bar that raises temperature of boiling of a cooling liquid considerably above 100С dominates. Thereby the certain reserve is created. The engine can reach workers of the temperatures exceeding 100С, and thus in system of cooling there is no danger of boiling.

Correct pressure in system is created thanks to a carving cover of a broad tank, which is supplied by a safety valve (1,2 – 1,5 bar) and the vacuum valve (0,06 – 0,1 bar). The vacuum valve lets in air if the cooling liquid becomes colder and by that takes less places.