Audi 80/Avant (B4) |
Audi 80/Avant The description Engines System of release of the fulfilled gases Cooling system Fuel tank and the fuel pump The air filter and intake channels - Injection system - System of injection Mono-Motronic Operating procedure Malfunctions and independent diagnostics Independent repair Visual check Check of separate elements Check of a mode of idling and the analysis of exhaust gases Check catalytic neutralizer and a ljambda-probe Trosovyj drive of "gas" The list of malfunctions System of injection Digifant System of injection KE-III-Jetronic Systems of injection MPI and MPFI Coupling Transmission and transmission Suspension bracket and steering Brake system Antiblocking system of brakes Wheels and tyres body electrosystem Ignition system Illumination Signalling devices Devices and auxiliary devices Heating and ventilation Body elements Search of malfunctions Specifications |
Malfunctions and independent diagnostics The block of management of system of injection Mono-Motronic can distinguish and write down a part of malfunctions which arise during engine operation in memory. If malfunction did not arise again during the subsequent 10 starts of the engine (sporadic malfunction) it is automatically erased from memory of the block of management. The information on constantly arising failures read out at inspection check in a workshop by means of the special device; in house conditions it is impossible to execute this work. If you suspect malfunction of management of ignition/injection to decipher indications of the store of malfunctions it is possible only in a workshop. In addition you can take advantage of our list of malfunctions in which we have resulted a considerable quantity of possible failures, even such which not to establish own diagnostics. After elimination of malfunctions memory of the store of malfunctions is erased by the reading device. |
|