Audi 80/Avant
The description
Engines
System of release of the fulfilled gases
Cooling system
Fuel tank and the fuel pump
The air filter and intake channels
Injection system
Coupling
Transmission and transmission
Suspension bracket and steering
Brake system
Antiblocking system of brakes
Wheels and tyres
body electrosystem
Ignition system
Illumination
Signalling devices
Devices and auxiliary devices
Heating and ventilation
- Body elements
Forward bumpers
Forward part of the car
Cowl
Wings
Молдинги
Doors
External rear-view mirrors
The forward and back has flown down
Cover of a luggage carrier at a sedan
Back door of the versatile person
Back bumper
The sdvizhnoj hatch
Procleaning of apertures for a water drain
The control of anticorrosive protection of the bottom of a body
Salon
Seats
Search of malfunctions
Specifications
|
The control of anticorrosive protection of the bottom of a body
The protective layer on the car bottom should be checked carefully and if necessary to renew. You can quite make it if you have a possibility reliably to lift and fix the car (a platform or the lift).
|
|
- Thoroughly to wash the body bottom, the following section see.
- To shine all bottom with a bright lamp and to survey the damaged places.
- The damaged places in anticorrosive protection to clear шабером, шпателем and a wire brush up to naked metal.
- To remove beginning corrosion if that has appeared.
- On the cleared surface to put a zinc paint from a spray as an anticorrosive first coat.
- Equal or big surfaces are processed by mastic which it is possible to put a brush.
- For remote seams and corners it is better to use баллончик, containing anticorrosive protection.
|
|
Important: bitumen anticorrosive protection on the car bottom it is possible дообрабатывать only a bitumen material, polymeric anticorrosive protection in wheel niches only – PVC-PROTECTION. |
|
|
|
|
The help: it is possible to apply to anticorrosive protection of the bottom of the car only certain materials. Incorrectly chosen means are aggressive in relation to a serial anticorrosive mixture. Along with products Audi/VW aerosols and firm Teroson pastes will approach.
At anticorrosive mixture drawing it is necessary to close brakes a paper or a polyethylene film for protection against greasing droplets.
This chapter is devoted internal furnish Audi 80 – that is to those details of a body which concern car salon. |
|
|