Audi 80/Avant (B4)



Audi 80/Avant
The description
Engines
System of release of the fulfilled gases
Cooling system
Fuel tank and the fuel pump
The air filter and intake channels
Injection system
Coupling
Transmission and transmission
- Suspension bracket and steering
   The control of a condition of a casing of the steering mechanism
   Check of dustproof covers and backlash tips of cross-section steering draughts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check backlash a steering
   Check wedge or semi wedge a belt
   Check of level of a working liquid
   Check backlash the bearing of a nave of a wheel
   Shock-absorbers
   The list of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   The list of malfunctions
   Running gear and steering repair
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering
   Steering repair
   The list of malfunctions
   Adjustment of the steering mechanism
   Refuelling by a liquid and prorolling of hydrosystem of the amplifier of a wheel
   Safety pillow
   Safety precautions requirements
Brake system
Antiblocking system of brakes
Wheels and tyres
body electrosystem
Ignition system
Illumination
Signalling devices
Devices and auxiliary devices
Heating and ventilation
Body elements
Search of malfunctions
Specifications












Safety precautions requirements

Газогенератор safety pillows is subject to instructions of the law on explosives. The reference with them is authorised only to the personnel familiar with numerous requirements of safety precautions.

From the list of safety measures the following is especially important:

 PERFORMANCE ORDER

  1. At repair of a pillow of safety it is obligatory to disconnect the accumulator.
  2. In addition to separate штекерное connection under a covering of a steering column.
  3. At interruption of works never to leave a safety pillow out of sight.
  4. To put the block of a pillow of safety only a power absorbing plate (lining) upwards.
  5. At welding works on the car to disconnect the storage battery.
  6. After road accident to replace all components of system.
  7. To spend car recycling only according to instructions!

Steering wheel removal

The models supplied with a pillow of safety

Removal of a steering wheel of the car supplied with a pillow of safety, it is possible to recommend only to the skilled mechanic. The one who неуверен in the forces, should address in a workshop.

 PERFORMANCE ORDER

  1. It is obligatory to observe safety precautions requirements.
  2. To disconnect a cable of the storage battery, the leader to "weight".
  3. To disconnect the block of a pillow of safety at the left and on the right on a steering wheel behind by means of key Т30.
  4. To put the block of an inflatable pillow of safety back.
  5. To disconnect safety bracket the tip of the block of a pillow of safety.
  6. To disconnect the tip from the block of a pillow of safety.
  7. To put the block of a pillow of safety so that rings Audi on the block were visible.
  8. To remove the top part of a covering of a steering column.
  9. To extend штекерное connection of a supply of conducting of the block of a pillow of safety from the bottom part of a covering. For this purpose a screw-driver slightly to press a fixing ledge in the middle of the bottom part of the tip and to extend connection.
  10. To separate штекерное connection.
  11. To remove a steering wheel under the description for the models which have been not supplied with a pillow of safety.
  12. At installation in addition to the instructions, concerning models without a safety pillow, it is necessary to consider the following: after installation of a steering wheel and an inhaling of bolts a hand to screw a fixing bolt of the block of a pillow of safety.
  13. Then to tighten at first right (on a car course) a bolt the moment 6 Nm.
  14. In last turn to tighten the left bolt the moment 6 Nm.