Audi 80/Avant (B4)

Wrong adjustment of corners of installation of wheels

If you wish to distinguish a wrong parity of corners of installation of operated wheels to begin with you should provide some conditions, namely presence on both forward wheels of the same grade of tyres, depths of a profile and the ordered pressure at driving.

• Whether steering wheel spokes are located at rectilinear movement symmetrically? Slanting position of a steering wheel often is a sign of wrong adjustment of a convergence.
• Unstable rectilinear movement; it is especially well distinguished on the road snow-covered or covered with ice.
• Whether conducts the car aside on completely equal road and at the released wheel?
• Whether the steering wheel after turns itself in direct position comes back?
• Look at forward wheels from distance in five-ten metres – whether there are they in direct position symmetrically under the relation to each other?
• Whether there was a unilateral deterioration of tyres? At a sharp manner of driving it, however, not such and the unusual phenomenon when external edges of tyres are worn out more strongly the internal.
• The disk with dents specifies in rigid contact with a border therefore the parity of angles of rotation of operated wheels can easily get off.