Audi 80/Avant (B4)



Audi 80/Avant
The description
Engines
System of release of the fulfilled gases
Cooling system
Fuel tank and the fuel pump
The air filter and intake channels
Injection system
Coupling
Transmission and transmission
Suspension bracket and steering
Brake system
Antiblocking system of brakes
Wheels and tyres
body electrosystem
Ignition system
- Illumination
   Illumination check
   Spare lamps
   Replacement of lamps
   Removal of headlights
   Check of adjustment of headlights
   Antifog headlights
   Independent installation of antifog headlights
   Indexes of turns
   Back lanterns
   Illumination of licence plates
   Other lighting devices
   Illumination of the instrument panel
Signalling devices
Devices and auxiliary devices
Heating and ventilation
Body elements
Search of malfunctions
Specifications












Indexes of turns

Replacement of lamps

 PERFORMANCE ORDER

  1. Models with 4 and 5-cylinder engines: dexterous hands is one of conditions of success of this work.
  2. To remove a radiator lattice on a left-hand side (at models with the 5-cylinder engine).
  3. Depending on what engine costs on your car, at first it is necessary to disconnect a rubber earring on the right block headlight, to wring out both fixing хомутика back and to extend upwards an average part of a cap (there where it costs, it will be necessary to remove in addition still an air inlet sleeve). To disconnect an external part of a covering (screws with crosswise шлицем, from above).
  4. If all of you do not reach yet, it is necessary to remove a block headlight.
  5. Models with the 6-cylinder engine: to weaken a bolt with crosswise шлицем at the block headlight case.
  6. To disconnect a headlight; it is built in an antifog headlight by two fixing ledges.
  7. All models: a few to turn a lamp socle to the left and to extend back.
  8. A few to press a lamp накаливания into a socle, to turn on the left and to take out.
  9. Installation: to insert a cartridge into the case of the index and to turn to the right against the stop.

Removal of the case of the index of turns

Models with 4 and 5-cylinder engines

 PERFORMANCE ORDER

  1. If necessary to remove a block headlight.
  2. To turn out a lamp cartridge.
  3. To compress fixing uvulas of the case of the index in a direction to a cartridge.
  4. To push out the case of the index of turns forward.
  5. For installation of the case of the index of turns carefully to insert fixing uvulas into headlights directing on the case and to fix.

Wires (1) for дооснащения are already laid by antifog headlights. They are brought (arrow) below to an adjusting aperture which becomes accessible after removal of a forward overlay (2).


For branch of the case of the index of turns from the case of a block headlight (1) at models with 4 and the 5-cylinder engine it is necessary to compress fixing uvulas (arrow) in a direction to a cartridge and to pull out the case from directing on the headlight case (the position 2 shows bottom).


Models with 4 and the 5-cylinder engine:

1 – a lamp cartridge;
2 – the lamp case.


Models with the 6-cylinder engine:

1 – the lamp case;
2 – external glass of the index of turn.
The arrow shows on one of fixing ledges by which the case of indexes of turn is established in the case of antifog headlights.