|
Malfunction
|
Its reason
|
Than to help
|
| A.Stseplenie slips |
1. Coupling overlays are worn out
2. Insufficient effort of pressing of coupling
3. Coupling overlays are made oily
4. Coupling has overheated |
To replace a conducted disk
To replace press a disk
To replace a conducted disk and a defective sealing epiploon of a transmission or a cranked shaft
To replace faulty details |
| V.Stseplenie does not separate |
1. Air in a hydraulic drive of coupling
2. Palpation of a conducted disk
3. The deformed conducted disk or the broken overlay
4. The conducted disk clamps on a transmission shaft
5. After very long parking an overlay приржавела to a flywheel
6. Tangential flat springs of a press disk are broken |
To replace a faulty detail, to pump over
To correct or replace a conducted disk
To replace a conducted disk
Properly to clean мелкошлицевое connection by a wire brush.
In summary to grease with paste or spray Moly
To include the first transfer and to put in action a starter that has earned the engine, constantly to press a coupling pedal. Sharply to press a pedal of an accelerator and there and then to release, to release coupling. Otherwise to dismantle
To replace press a disk |
| S.Stseplenie is not separated and simultaneously "conducts" |
The coupling disk is worn out press |
To replace press a disk |
| D. Coupling pulls |
1. Malfunction of the engine or knots of fastening of a transmission
2. Roughnesses of a surface прилегания a flywheel or a press disk
3. Wrong overlays |
To replace the bearing of the engine or knots of fastening of a transmission
To replace a faulty detail
To replace a conducted disk |
| E.Shumy of coupling |
1. A disbalance of a press disk of coupling or a conducted disk
2. A defective spring гасителя крутильных fluctuations
3. It is faulty выжимной the bearing
4. Are weakened заклепочные connections in coupling
5. The needle bearing in a back end face of a cranked shaft is faulty |
To replace press a disk of coupling or a conducted disk
To replace a conducted disk
To replace выжимной the bearing
To replace press a coupling disk
To replace the needle bearing |